Category Archives: ~Valentines Day

Valentines Day Handmade Cards

Posted on by
5

Materials:

  • Cardstock
  • Crayola® Glue Stick
  • Crayola® Markers
  • Scissors
  • Pencil

Instructions:

  1. Pop-Up Hearts Card
    Fold two square paper pieces in half. Take one and cut two parallel, 2-inch slits about a ½ inch apart on the right side of card. Repeat and decrease length of slits until you have 3 strips.
    Open the card and use your index finger to gently push the strips into the card.  This will form the small “steps.”
  2. Pop-Up Hearts Card (Continued)
    Close the card.  It should now have a missing notch along the fold since you’ve pushed the pop-up portion into the center of the card.
    Glue the second blank card over the card with the pop-up so you can’t see the missing notches.
    Use glue to adhere cut hearts to the front of the steps inside the card. The hearts will pop up when the card opens. Embellish card as desired with markers.
  3. Heart with Arrow Card
    Fold square paper piece in half.
    Cut heart and arrow from contrasting paper colors.
    Glue shapes to card’s top as shown. Embellish card as desired with markers.
  4. Flower Card
    Fold square paper piece in half and then half again.
    Cut 4 hearts and a small circle out of contrasting paper colors.
    Glue shapes to card’s top to form a flower as shown. Embellish card as desired with markers.

Valentines Day Candy Box

Posted on by
Reply

Materials:

  • Scrapbook Paper – Valentine’s Pattern
  • Tulle – Pink
  • Glitter Glue – Red
  • Glitter – Red
  • Glitter Glue- Opal
  • Lace Doily
  • Crayola® Model Magic® – Red, White and Earthtone
  • Plastic Knife
  • Ribbon of Choice
  • Scissors
  • Pencil
  • Aleene’s “Tacky” Glue®
  • Foam Heart-Shaped Box
  • Candy Cups
  • Foam Sticker – Love
Instructions:
  1. Make the “candy” shapes first so they will have time to dry. Using brown Model Magic, shape balls and squares to about an inch.
  2. Roll white Model Magic into thin roll and use as “icing” on the candy.
  3. For a marbled look, work equal amounts of white and brown together until marbled to your liking and then shape.
  4. Roll white and brown separately to about ¼ inch thick, then layer and cut into 1 inch squares.
  5. Use bottom of the box as your pattern and trace onto paper. Cut out shape.
  6. Glue paper to box top. Glue doilies to box top as desired.
  7. Roll out red Model Magic to ¼ inch. Cut out heart shape, let dry and coat with clear glitter glue, let dry.
  8. Add pink foam heart and Love sticker.
  9. Cut paper strip to fit around top edge of box, top with ribbon.
  10. To decorate the inside of the box (Optional)

    ~Flip box bottom upside down, and trace onto paper of choice. Adhere paper to inside of box lid. Set aside.
    ~Cut 15 one-inch circles out of coordinating papers, and glue into candy cup bottoms. Use adhesive numbers, or markers to number all the candy cups.
    ~Assign a chore to each number in the candy cups. Either write with marker, or use adhesive letters to spell out chores on the inside of box lid.

 

 

 

Valentines Day Heart Frame

Posted on by
1

Materials:

  • Wood Frame
  • Yarn
  • Pony Beads
  • Acrylic Paint – Baby Pink
  • Acrylic Paint – Primary Red
  • Sharpie® Fine-Tip Permanent Marker – Black
  • Scissors
  • Pencil
  • Paint Brush
  • Craft Smart® All Purpose Glue
  • Paper Towels
  • Paper Plate

Instructions:

  1. Remove cardboard backing from frame, set aside.
  2. Paint frame Pink, let dry.
  3. Dry brush frame with Red, let dry.
  4. Cut flowerpot shape from cardboard from the inside of the frame to create flowerpot.
  5. Wrap yarn around fingers to create flower. Tie center with yarn.
  6. Trim ends of yard and fluff for flowers.
  7. Make 4 yarn flowers. Make flowers different sizes.
  8. Glue pony beads to centers.
  9. Brush flower pot with glue and wrap yarn around to cover.
  10. Glue flower pot to frame as shown, glue flowers in place.
  11. Draw leaves on frame with black marker.

Valentines Day Tic-Tac-Toe

Posted on by
Reply

Materials List:

  • Clay – Hot Pink
  • Clay – Red Hot Red
  • Clay – Violet
  • Clay – White
  • Oven (for adult use only)

Instructions:

  1. Teardrop – Start with a ball of clay and then taper it on one end with your fingers.
  2. Coil – Roll a lump of clay until it’s long and skinny.
  3. Create Shapes: Ball – Take a lump of clay and roll it in your palms until its smooth.
  4. Roll a lump of clay until it’s long and skinny.

  5. Cut off 1/4 of the White and set it aside for later. Shape the rest of the White into a large smooth ball.

  6. Flatten the White ball into a disk about 3″ wide. Smooth out any bumps with your finger.
  7. Roll Hot Pink into a long skinny coil. Flatten the coil as you press it into place on top of the White disk making the criss-cross pattern you need to play Tic Tac Toe. Press some more of the Hot Pink coil around the outside of the White disk.
  8. Take eight tiny pinches of Red Hot Red and shape them into teardrops. Flatten these into heart shapes on the game board by pressing two teardrops side by side with the points down.
  9. Make 5 balls with Red Hot Red and 5 balls with Violet. The balls should be as wide as a dime. Flatten the balls into playing pieces. Use White to decorate the Red Hot Red pieces with X’s. Put a tiny White ball in the center of each Violet piece to make O’s.
  10. Adults only- Bake all the pieces and the game board in the oven at 275 °F for 15 minutes. Don’t handle any of the pieces until they are completely cool.

 

 

Valentines Day Heart

Posted on by
1

~  Wooden heart plaque
~  4″ paper doily
~  foam glitter sticker hearts
~  pom poms – pink
~  acrylic paint, Engine Red
~  Ribbon of choice
~  Paintbrush
~  Craft glue
~  Glue stick
~  Paper towels
~  Paper plate
Instructions
step 1 – Paint plaque red and let dry.
step 2 – Glue doily to center of plaque.
step 3 – Remove backing from sticker heart and place in center of doily.
step 4 – Glue pink pom poms around outer edge of doily as shown.
step 5 – Add loop of ribbon for hanger. Secure to backside of piaque with glue. Let dry.